NET-2 Install

DIN Rail
Artikelnr: D-50816 Kategorier: , ,

Wide range input voltage
2 universes DMX input or output
Supports Art-Net and sACN
Remote setup interface
POE (IEEE 802.3 Af)
DIN EN43880 form factor
DIN EN60715 rail system

The Showtec NET-2 Install is the ideal compact fixed-installation node for you. All connections are easy connectable with the plug-in Phoenix terminals, and both bi-directional DMX ports are optically isolated to prevent any interference from getting hold of your signal. Power can be supplied via PoE or on the wide range DC power input. A maximum of 1024 channels can be transported over a single CAT5. All settings can be done by the easy-to-use menu on the graphic display and buttons on the front or via the remote web interface which can be accessed within the network. Default login account: Admin, password: Admin. The din-rail mounted NET-2 converts Art-Net or sACN to DMX512 and back, and is ideal for network system integration projects.

Configuration examples:
- Art-Net to 2x DMX output
- 2x DMX input to Art-Net
- Clone 1 DMX inputs to 1x DMX output and Art-Net
- HTP/LTP Merge 2x Art-Net to DMX output
- HTP/LTP Merge DMX input and Art-Net to DMX output

Power Supply: 12-36 VDC
Power over Ethernet (PoE): Yes
Power Consumption: 6 W
Power Connector In: Phoenix
DMX Connector: Phoenix In/Out
DMX Connector In: Phoenix
DMX Connector Out: Phoenix
Data Connector In: RJ45
Length (mm): 106 mm
Width (mm): 87 mm
Height (mm): 58 mm
Weight: 0.18 kg
Housing: Plastic
Colour: Gray
DIN Rail Spacing: 35 mm
Control Mode: Art-Net / DMX / TCP IPv4
DMX Channels: 1024
Protocols: Art-Net / DMX / RDM / sACN / TCP-IPv4
Display: OLED
Universes: 2